Chapter 4: Getting Started; Before You Begin; Connecting The Phone Adapter; Figure 4-1: Connect A Telephone - Cisco Linksys SPA2102 User Manual

Chapter 4: Getting Started

Before You Begin

Make sure you have the following:
• An active Internet connection
• An active Internet phone service account and its settings
• cable/DSL modem
• One computer for configuration of the Phone Adapter
• Analog telephone or fax machine with an RJ-11 phone cable

Connecting the Phone Adapter

1. Power off your network devices, including your modem and PC.
2. Connect the RJ-11 phone cable to the Phone Adapter's PHONE 1 port. Connect the other end to your analog
telephone or fax machine.
IMPORTANT: Do not connect the PHONE port to a telephone wall jack. Make sure you only
connect a telephone or fax machine to the PHONE port. Otherwise, the Phone Adapter or the
telephone wiring in your home or office may be damaged.
3. Repeat step 2 with the PHONE 2 port.
Chapter 4: Getting Started
Before You Begin
Phone Adapter with Router

Figure 4-1: Connect a Telephone

9