Subaru Impreza 2004 Service Manual page 71

BRAKE
3) Inspect the brake pedal after installation <Ref. to
BR-71, INSPECTION, Brake Pedal.>
C: DISASSEMBLY
1. LHD 1.6 L MT MODEL
1) Remove the stop light switch.
<Ref. to BR-73, REMOVAL, Stop Light Switch.>
2) Remove the nut and pull out the bolt until brake
pedal is able to remove, then remove brake pedal.
3) Remove the bushing, spring and stopper.
(4)
(2)
(1) Stopper
(2) Bushing
(3) Brake pedal
(4) Brake pedal spring
4) Remove the brake pad.
2. LHD 2.0 L MT MODEL
1) Remove the brake switch.
<Ref. to BR-73, REMOVAL, Stop Light Switch.>
2) Remove the clutch pedal.
<Ref. to CL-42, DISASSEMBLY, Clutch Pedal.>
Brake Pedal
BR-00321
(2)
(1)
(3)
BR-00322
BR-70
3) Remove the clutch master cylinder bracket.
4) Remove the bushing, spring and stopper.
(1) Stopper
(2) Bushing
(3) Brake pedal
(4) Brake pedal spring
5) Remove the brake pedal pad.
3. LHD 2.5 L MT MODEL
Refer to LHD 2.0 L MT MODEL for disassembly.
<Ref. to BR-70, LHD 2.0 L MT MODEL, DISAS-
SEMBLY, Brake Pedal.>
4. LHD AT MODEL
1) Remove the brake switch.
2) Unbolt, and then remove the brake pedal.
BR-00129
BR-00130
BR-00100