Subaru Impreza 2004 Service Manual page 24

9. HILL HOLDER
(1)
(1) Clamp
(2) PHV cable
(3) PHV (Pressure hold valve)
C: CAUTION
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
• Use SUBARU genuine grease etc. or the equiv-
alent. Do not mix grease etc. with that of another
grade or from other manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or shop cloth between the part and the vise.
General Description
(6)
(2)
(4) Adjusting nut
(5) Lock nut
(6) To clutch pedal
BR-23
(1)
(3)
(4)
(5)
T1
Tightening torque: N·m (kgf-m, ft-lb)
T1: 3.5 (0.35, 2.5)
T2: 18 (1.8, 13.0)
BRAKE
T2
BR-00121