Subaru Impreza 2004 Service Manual page 33

BRAKE
4) Remove the brake pads from caliper body. <Ref.
to BR-26, 17 INCH TYPE, REMOVAL, Front Brake
Pad.>.
5) Remove the union bolt and brake hose from cal-
iper body assembly.
6) Remove two installation bolts from housing.
(2)
(1) Union bolt
(2) Installation bolt
7) Clean mud and foreign particles from the caliper
body assembly.
B: INSTALLATION
1. 14 INCH AND 15 INCH TYPE
1) Install the support on housing.
Tightening torque:
80 N·m (8.2 kgf-m, 59 ft-lb)
2) Apply thin coat of Molykote AS880N (Part No.
K0777YA010) to the frictional portion between pad
and pad clip.
3) Apply thin coat of Molykote AS880N (Part No.
K0777YA010) to the frictional portion between pad
and inner shim.
4) Install the pads on support.
5) Install the caliper body on support.
Tightening torque:
37 N·m (3.8 kgf-m, 27.5 ft-lb)
6) Replace the brake hose gaskets with new ones,
and then connect the brake hose.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
Front Disc Brake Assembly
7) Bleed air from the brake system.
2. 16 INCH TYPE
1) Install the caliper body on housing.
Tightening torque:
2) Apply thin coat of Molykote AS880N (Part No.
K0777YA010) to the frictional portion between pad
(1)
and pad inner shim.
BR-00299
3) Install the pads on caliper body.
4) Install the pad pins and cross spring on caliper
body.
5) Install the M clip.
6) Replace the brake hose gaskets with new ones,
and then connect the brake hose.
Tightening torque:
7) Bleed air from the brake system.
3. 17 INCH TYPE
1) Install the caliper body assembly on housing.
Tightening torque:
2) Apply thin coat of Molykote AS880N (Part No.
K0777YA010) to the frictional portion between pad
and pad shim.
BR-00015
3) Install the pads on caliper body.
4) Install the cross spring.
5) Install the pad pins.
6) Install the clip.
BR-32
80 N·m (8.2 kgf-m, 59 ft-lb)
18 N·m (1.8 kgf-m, 13.0 ft-lb)
155 N·m (15.8 kgf-m, 114.3 ft-lb)
BR-00328
BR-00381