Vlan Group - Planet FSD-804PS User Manual

4.5.1 VLAN Group

The VLAN Group page contains fields for managing VLAN mode of the Switch and setting ports that are part of a VLAN.
The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All untagged packets arriving to the
device are tagged by the ports PVID. The screen in
The VLAN mode had three modes:
■ Disable (No VLAN)
■ Port-Based VLAN
■ 802.1Q VLAN
This function group individual ports into a small "Virtual" network of their own to be independent of the other ports. The
screen in Figure 3-6 appears.
The Switch supports Port-based and 802.1Q (Tagged-based) in Web management page. In the default configuration,
VLAN support is "Disable".
Object Description
VLAN Type
There're three VLAN mode support – 802.1Q VLAN, Port-Bas VLAN and Disable (No VLAN).
• 802.1Q – Packets income will be tagged with VID as the PVID setting. All ports on the switch
• Port-Base - Packets can only be broadcast among other members of the same VLAN group.
• Disable - Forbidden ports are not included in the VLAN
Figure 4-23 VLAN Group screenshot
belong to default VLAN (VID 1).
Note all unselected ports are treated as belonging to the default system VLAN.
If Port-based VLAN are enabled, then VLAN-tagging feature is ignored.
Figure 4-16 and 4-17 appears.
User's Manual of FSD-804PS
- 37 -