Rack Mounting (Optional Rack Kits) - Planet FSD-804PS User Manual

2.5 Rack Mounting (Optional Rack Kits)

To install the Switch in a 10-inch or 19-inch standard rack, PLANET provides the optional rack mount kits RKE-10A /
RKE-10B for different need. Follow the instructions described below.
Step1: Place your Switch on a hard flat surface, with the front panel positioned towards your front side.
Step2: Attach a rack-mount bracket to each side of the Switch with supplied screws attached to the package.
shows how to attach brackets to one side of the Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the rack, as
shown in Figure 2-6.
Step6: Proceeds with the steps 4 and steps 5 of session 2.4 Desktop Installation to connect the network cabling and
supply power to your Switch.
Figure 2-5 Attaching the brackets to the Switch.
Figure 2-6 Mounting the Switch in a Rack
User's Manual of FSD-804PS
Figure 2-5
- 13 -