Planet FSD-804PS User Manual page 45

Remember to remove the Port 1 – Port 6 from VLAN 1 membership, since the Port 1 – Port 6 had been assigned to
VLAN 2 and VLAN 3.
It's import to remove the VLAN members from VLAN 1 configuration. Or the ports would become
overlap setting. ( About the overlapped VLAN configuration, see next VLAN configure sample)
3. Assign PVID for each port:
Port-1,Port-2 and Port-3 : PVID=2
Port-4,Port-5 and Port-6 : PVID=3
Port-7~Port-8: PVID=1
4. Enable VLAN Tag for specific ports
Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3) be set to "Tagged".
The Per Port VLAN configuration in Figure 4-24 appears.
Figure 4-29 Port 1-Port 8 VLAN Configuration
User's Manual of FSD-804PS
- 45 -