RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:25페이지57
When selecting "DRC DD", "DRC ThD"
• This function compresses the dynamic range of previously
specified parts of the Dolby Digital or Dolby TrueHD sound
track (with extremely high volume) to minimize the
difference in volume between the specified and non-
specified parts.
This makes it easy to hear all of the sound track when
watching movies at night at low levels.
■Notes:
• These settings are valid only when the digital signals from
the Dolby Digital or Dolby TrueHD program source are
being input.
• In some Dolby Digital softwares, these settings may not be
valid.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired "DRC" mode, then press the
ENTER button.
2.
Press the CURSOR LEFT(◀)/ RIGHT(▶)
buttons to adjust the dynamic range
compression as desired.
■When selecting the "DRC DD"(DYNAmIC
RANGE COmPRESSION DOLBY DIGITAL)
→ OFF : To turn off the DRC function
↕
MID
Higher compression
↕
→ MAX
■When selecting the "DRC ThD"(DYNAmIC
RANGE COmPRESSION DOLBY TRUEhD)
→ AUTO : To adjust the dynamic range compression
↕
automatically.
OFF : To turn off the DRC function
↕
MID
↕
Higher compression
→ MAX
When selecting "h.GAIN"
• You can adjust the front height channel level as desired.
■Note:
• This setting is valid only when listening in Dolby Pro Logic
IIz mode.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "H.GAIN".
2.
Press the CURSOR LEFT(◀)/ RIGHT(▶)
buttons to adjust the front height channel level
as desired.
→ LOW : To decrease the front height channel level.
↕
MID : To output the front height channel sound with
↕standard sound volume level.
→ HIGH : To increase the front height channel level.
57