Sherwood RD-705i Operating Instructions Manual page 12

RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 12
■SETUP mIC JACk
• To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When
selecting the AUTO SETUP" on page 47.)
■Notes:
• Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than
the one supplied with this receiver.
• After you have completed the auto setup procedure, disconnect the microphone.
■FRONT AUx IN JACk
• The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc.
■ Note :
• When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.
■USB CONNETOR
• An USB memory device can be connected to the USB connector either
on the front panel or on the rear panel to listen to MP3 or WMA files
stored on it through this unit. (For details, refer to "When selecting
"music library"" on page 32.)
■ Note :
• After USB playback, remove the USB memory device in the stop mode
or the standby mode.
■
VIDEO 4 IN JACkS
• The VIDEO 4 IN jacks may be also connected to an additional video
component such as a camcorder, a video game player, etc.
SETUP MIC
F.AUX
Microphone
USB
5V / 1A
USB
5V / 1A
12
VIDEO 4
VIDEO L AUDIO R
USB memory device
VIDEO 4
VIDEO L AUDIO R