Sherwood RD-705i Operating Instructions Manual page 36

RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 36
3.
Press the ENTER button.
• Then the previous status is returned to.
4.
Visit the Reciva website at www.reciva.com on
your computer.
5.
Create an account and register your radio.
• When you have registered your radio, you can take
advantage of various additional features and services that
it provides.
■When selecting "Playback"
• You can play music files stored on a USB memory device
in the desired playback mode.
During playback of music files, select the desired playback
mode.
P l a y b a c k
1 R e
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select "Repeat" or "Shuffle", then press the
ENTER button.
3.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select "off" or "on", then press the ENTER button.
• Then the selected playback mode is set as desired and
the previous status is returned to.
* off : To deactivate the selected playback mode
* on : To activate it.
• For details on playback modes, see "To play repeatedly"
and "To play in random order" on page 30.
4.
Press the AUDIO ASSIGN(/RETURN) button to
return to previous status.
AUDIO ASSIGN
RETURN
S a v e S e t t i n g s ?
1 OK
AT
p e a t
AT
5.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select "OK" or "CANCEL", then press the ENTER
button.
• When the "OK" is selected, the playback settings are
stored and the previous status is returned to.
• When the "CANCEL" is selected, the playback settings are
not stored and the previous status is returned to.
■When selecting "Network"
• To listen to Internet radio stations, music broadcasts or
music files stored on your computer via a wireless
network, you should configure network settings first.
N e t wo r k
1 W i r e l e s s
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select "Wireless" or "Status", then press the
ENTER button.
Example: When selecting "Wireless"
W i r e l e s s
1 WPS
• When "Wireless" is selected, you can configure network
settings simply and easily.
• When "Status" is selected, you can check the information
on network settings.
◆When selecting "Wireless"
3.
Press the CURSOR UP(▲)/DOWN(▼) buttons to
select "WPS" or "AP List", then press the ENTER
button.
• If your wireless router with access point supports WPS
function, you can select "WPS".
• If not, select "AP List".
* In case of selecting "WPS"
AT
P r e s s WP S
/
• Press the WPS button on your wireless router.
Then the network settings are automatically configured
and the "Status" menu will be displayed to check the
information on network settings.
36
AT
S e t t i n g
AT
S e t t i n
b u t t o