Cloning Function; Partial Reset; Total Reset - Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

Cloning function

The IC-R3 has receiver-to-receiver data cloning capability.
This function is useful when you want to copy all of the pro-
grammed contents from one IC-R3 to another. An optional
OPC-474 is required.
CLONING CABLE
The optional CS-R3
CLONING SOFTWARE
OPC-478
CLONING CABLE
contents with a PC (for Microsoft
q While pushing [MODE] and ó [UP], push [POWER] for 2
sec. to enter cloning mode.
• "CLonE" appears.
w Connect an optional OPC-474 between both [SP] jacks.
e Push [SQL] on the "mas-
ter" receiver (receiver-to-
receiver cloning only).
• "oUt" appears and the signal
indicator shows that cloning
is taking place.
r Push [POWER] for 2 sec.
to turn power OFF.
® ®
Microsoft and Windows are regis-
tered trademarks of Microsoft Corpo-
ration in the U.S.A and other
countries.
and the optional
are available to clone and edit
® ®
Windows 95 and 98).
OPC-474
OTHER FUNCTIONS

Partial reset

If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing the
memory contents, a partial resetting function is available for
the receiver.
While pushing [FUNC] and [V/M], turn power ON to par-
tially reset the receiver.

Total reset

Reset the CPU before operating the receiver for the first time,
or when the internal CPU malfunctions.
While pushing [FUNC], [V/M] and [MODE], turn power ON
to reset the CPU.
• "CLEAR" appears in the sub LCD when resetting the CPU.
CAUTION:
Resetting the CPU returns all programmed
contents to their default settings.
13
45