Skip Channel Setting; Scan Resume Condition - Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

6
SCAN OPERATION

Skip channel setting

Memory channels can be set to be skipped for memory skip
scan. In addition, memory channels can be set to be skipped
for both memory skip scan and frequency skip scan. These
are useful to speedup the scan interval.
q Select memory mode with [V/M].
w Rotate [DIAL] to select a memory channel to be pro-
grammed as a skip channel.
e While pushing [FUNC], push [(V/M) SKIP] one or more
times to select a condition.
• No indication
• "SKIP" or """ appears
• "PSKIP" or "P"" appears: channel skipped during memory
This setting is effective when the frequency skip function
("PSKIP" or "P"") is turned ON. See p. 24 for details.
22
: channel will not be skipped.
: channel skipped during memory
scan.
scan; frequency skipped during full,
band and programmed scans.
FM FM
M:A00
146.010.000 146.010.000
TS 15.0 TS
S1 3 5 7 9 S1 3
VOL VOL
FM FM
Non-skip channel Skip channel

Scan resume condition

◊ Setting the scan pause time
The scan pauses when receiving signals according to the
scan pause time. It can be set from 2–20 sec. or unlimited.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until "Pause Scan" or "PAUSE" appears.
• "PAUSE" disappears after 1 sec. and the previously selected
scan pause time and "PA" appears when color LCD is OFF.
SKIP FM PSKIP
M:A00 M:A00
146.010.000
15.0 TS 15.0
5 7 9 S1 3 5 7 9
VOL
FM
P
Skip channel and
frequency skip channel