Function Display; Panel Description - Icom IC-R8500 Instruction Manual

■ Function display

q
WFM
REMOTE
SLEEP
@4
LOCK
@3
@2
NB AFC AGC-F
RECV
@1
@0 !9 @0 !8
q REMOTE INDICATOR (p. 35)
Appears when a level control command is received from a
PC via CI-V data.
• When this indicator appears, the control knob's setting
is ignored.
• This indicator will disappear when the control knob is rotated.
w MODE INDICATORS (p. 13)
Show the operating mode.
e FREQUENCY READOUT
Shows the operating frequency.
r SKIP INDICATOR (p. 25)
➥ Appears when the skip function is activated.
➥ Flashes during scan when the skip function is
activated by the auto skip function.
t VSC INDICATOR (p. 26)
Appears when the voice scan control function is
activated.
y SCAN RESUME CONDITION INDICATORS (p. 27)
Show the selected scan resume condition.
u TUNING STEP INDICATORS (p. 12)
Show the selected tuning step.
• " " appears when a programmable tuning step is selected.
P
i TEMPORARY MEMORY INDICATOR (p. 19)
➥ Appears when [M-SET] is pushed to indicate
that a frequency is being temporarily saved.
➥ Disappears when the temporary memory is
pasted into another memory channel.
o MEMORY CHANNEL READOUT (p. 17)
Shows the selected memory channel number.
!0 SKIP CHANNEL INDICATOR (p. 25)
Appears when the selected memory channel is set
as a skip channel.
!1 MEMORY NAME INDICATORS (p. 20)
Display names programmed into a memory, or scan
group.
w
AMUSBLSBCW
BANK
APF-N
10-ATT-20
!7 !6 !5
e r
SKIP VSC
WIDE NAR
SEL-CH SKIP-CH
!4 !3 !2 !1 !0
!2 SELECT CHANNEL INDICATOR (p. 23)
Appears when the selected memory channel is set
as a select channel.
!3 BANK NUMBER INDICATOR (p. 17)
Shows the selected memory bank number.
!4 BANK INDICATOR (p. 18)
➥ Appears when the bank limit function is activated.
➥ Flashes during scan when the bank limit func-
tion is activated by the auto bank function.
!5 BANK NAME INDICATOR (p. 20)
Displays names programmed into a bank.
!6 AUDIO PEAK FILTER INDICATOR (p. 15)
"APF" or "APF-N" appears when the audio peak fil-
ter function is activated.
!7 ATTENUATOR INDICATORS
Appear when the RF attenuator is activated.
!8 AUTOMATIC GAIN CONTROL INDICATOR (p. 15)
AGC-F appears when AGC fast is selected; no indi-
cation appears when AGC slow is selected.
!9 RECEIVE INDICATOR
Appears while receiving.
@0 FM CENTER INDICATORS (p. 14)
Appear when the received signal is not tuned to its
center frequency.
@1 NOISE BLANKER INDICATOR (p. 15)
Appears when the noise blanker circuit is activated.
@2 AFC INDICATOR (p. 14)
Appears when the automatic frequency control
function is activated in either FM or WFM modes.
@3 LOCK INDICATOR (p. 12)
Appears when the main dial or front panel switches
are locked.
@4 SLEEP INDICATOR (p. 29)
Appears when the sleep timer is set.

PANEL DESCRIPTION

t y
OFF DLY
P
MHz kHz
M
o i
1
u
6