Panel Description - Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

2

PANEL DESCRIPTION

Panel description
q
w
e
r
t
q ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.
2
Color LCD
(p. 6)
Sub LCD
(p. 4)
SPEAKER
w FUNCTION SWITCH [FUNC]
While pushing this switch, other switches and tuning dial
perform secondary functions.
• "Push [FUNC] + a switch" means "while pushing the [FUNC]
!1
switch, push the switch" as indicated by the mark e.g. [↕] etc.
e MULTI FUNCTION SWITCH [MULTI]
!0
Push [↕] to adjust the audio level. (p. 11)
Push [FUNC] + [↕] to toggle between AM TV (frequency
selection), amateur TV (ATV-type) and WFM/FM/AM
modes when the color LCD is OFF. (p. 34)
Push [FUNC] + [↕] for 2 sec. to toggle the color LCD ON
o
and OFF (p. 6, 30 MHz and above only).
Push [FUNC] + [↕] to select color LCD function when the
color LCD is ON. (p. 6)
i
Push [↔] to select the operating band (VHF, UHF, etc.)
in VFO mode. (p. 7)
• Broadcast, HF, 50 MHz, FM broadcast, VHF avionics, 144
MHz, 300 MHz, 400 MHz, 800 MHz, 1200 MHz, 2400 MHz
u and TV bands (channel selection) can be selected.
Push [FUNC] + [↔] to select the dial select step. (p. 39)
Push [↔] for 2 sec. to start a scan. (pgs. 19, 20)
y
Push [FUNC] + [↔] for 2 sec. to start a tone scan. (p.
30)
Push [↕] means push ó up or down; and push [↔] means
push ó left or right.
r POWER SWITCH [POWER]
Push for 2 sec. to toggle the receiver power ON and OFF.