Skip Setting For Scanning - Icom IC-RX7 Instruction Manual

6
SEARCH AND SCAN OPERATIONS

■ Skip setting for scanning

Memory category/group/name can be set to be skipped
during scan. In addition, memory channels can be set to be
skipped during search. This is useful to speed up the scan/
search rate.
q Enter "SKIP" in SCAN menu.
MENU ➪ SCAN ➪ SKIP
(Push [MENU
• Scan menu can also be entered by pushing and holding
[SCAN] for 1 sec.
NO. MENU
DIAL
CLR ENT
SQL MW
HOLD V 1 2 3
4 5 6
SCAN
7 8 9
SEARCH
.
0 SKIP
ATT
44
]), (Push [r]/[s], then push [ENT MW].)
MENU
Push
ENT
MW
w Push [v]/[w] once or twice to to select "CATEGORY,"
"GROUP" or "NAME."
e Push [r]/[s] (or rotate [DIAL]) to select the category
(group/name) to be skipped.
r Push [SKIP] to set the skip state.
• Push [SKIP] again to cancel the skip state.
ENT
t Push [ENT MW]
MW
menu, and push [CLR SQL] to return to frequency indica-
tion.
✔ CONVENIENT!
The group skip setting can be set with the following opera-
tion during a scan or scan holding state.
q Select the desired memory group to be skipped.
w Push and hold [SKIP] for 1 sec., and rotate [DIAL] to se-
lect the skip setting from "ON (skip)" and "OFF
[ENT MW].
several times to return to SCAN
(or [v] )
" then push
,