I Skip Channel/Frequency Setting - Icom IC-R1500 Instruction Manual

5
SCAN OPERATION

I Skip channel/frequency setting

You can set the selected memory channel as a skip channel
which is skipped during memory skip scan. In addition, it can
be set as a skip channel for both memory skip scan and
frequency skip scan. These are useful to speed up the scan
interval.
q Select a memory channel.
➥ Push [MR•SKIP] several times to select memory mode,
then rotate [DIAL] to select the desired memory channel
to be a skip channel.
• "!" and memory channel number blink.
w Push [SET•LOCK] to enter set mode.
ePush [SET•LOCK] or [S.MW•MW] several times until
"CHS" appears.
rRotate [DIAL] to select the skip condition for the selected
channel.
• CHS-ON : When "~" appears, the channel is skipped during
scan.
When "P ~" appears, the channel is skipped during
scan and the programmed frequency is skipped dur-
ing VFO scan, such as programmed scan.
• CHS-OF : The channel is scanned during scan. ("~" disap-
pears)
t Push [TS•MODE] to exit set mode.
23
z Select a memory channel.
➥ Push [MR•SKIP] several times to select
memory mode, then rotate [DIAL] to select
the desired memory channel to be a skip
channel.
• "!" and memory channel number blink.
x Push [MR•SKIP] for 1 sec. to set the selected
channel as a skip channel.
• When "~" appears : The channel is skipped
during scan.
• When "P ~" appears : The channel is skipped
during scan and the pro-
grammed frequency is
skipped during VFO scan,
such
scan.
• When "~" disappears: The channel is scanned
during scan.
[
as programmed