Oven Cooking; Control Pad Operation; Control Options; Setting Control Functions - Jenn-Air ELECTRIC DOWNDRAFT SLIDE-IN User Manual

O
C
VEN OOKING
The electronic control is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
CAUTION
• Be sure all packing material is re-
moved from oven before turning on.
• Prepared Food Warning: Follow
food manufacturer's instructions. If a
plastic frozen food container and/or
its cover distorts, warps, or is other-
wise damaged during cooking, imme-
diately discard the food and its con-
tainer. The food could be contami-
nated.
• Follow the manufacturer's directions
when using oven cooking bags.
• Do not use oven for storing food or
cookware.
C P
ONTROL AD
O
PERATION
• Press the desired function pad.
• Press the Auto Set pad or the appropri-
ate number pad(s) to enter time or tem-
perature.
• A beep will sound when any pad is pressed.
• A double beep will sound if a program-
ming error occurs.
• Further instructions will scroll in display
after function pads are pressed.
NOTE: The temperature or time will be
automatically entered four seconds after
selection.
If more than 30 seconds elapse between
pressing a function pad and the Auto Set
pad or number pads, the function will be
canceled and the display will return to the
previous display.
C O
ONTROL PTIONS
Several control options are indicated under
the number pads on the control. Factory-
set options can be changed to your prefer-
ences. See page 13 for more information.
S C
ETTING ONTROL
F
UNCTIONS
C P
LOCK AD
1. Press Clock pad. Indicator word TIME
will flash in the display.
2. Press the appropriate number pads for
the current time.
After a power interruption, POWER IN-
TERRUPTION will scroll followed by SET
CLOCK.
To recall the time of day when another
function is showing, press Clock pad.
7
Clock time cannot be changed when the
oven has been programmed for clock con-
trolled cooking, self-clean or delayed self-
clean.
The clock may be set to a 24-hour clock.
See Control Options (12/24 Hour Clock),
page 13.
T P
IMER ADS
The timer(s) may be set for any time period
up to 99 hours and 59 minutes (99:59).
The timer(s) operates independently of any
other function and can be set while another
oven function is operating. THE TIMER
DOES NOT CONTROL THE OVEN.
1. Press the Timer 1 or 2 pad. TIMER 1
or 2 will flash respectively. 0HR:00 will
appear in the display.
2. Press the appropriate number pads to
enter desired time.
3. TIMER 1 or TIMER 2 will be displayed. If
both timers are active, the Timer with
the least amount of time left will be
displayed.
EXAMPLE: To set a timer for 5 minutes,
press the Timer 1 pad and the number
pad 5. The control will begin countdown
after a four second delay.
4. The last minute of the countdown will be
displayed in seconds.