Hard Drive - HP Pavilion 13 Maintenance And Service Manual

Reverse this procedure to install the battery.

Hard drive

NOTE: The hard drive spare kit does not include the hard drive bracket or hard drive connector
adapter. The hard drive bracket and hard drive connector adapter are included in the Hard Drive
Hardware Kit, spare part number 783027-001.
Description
1-TB, 5400-rpm, 7.2-mm
750-GB, 5400-rpm, 7.2-mm
500-GB, 5400-rpm, 7.0-mm
500-GB, 5400-rpm, Hybrid 8-GB, 7.0-mm
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the hard drive:
1. Release the ZIF connector (1) to which the hard drive cable is attached, and then disconnect the
hard drive cable from the system board.
2. Remove the two PM2.4×3.8 screws (2) that secure the hard drive to the bottom cover.
36 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
Spare part number
762990-005
752099-005
683802-006
732000-005
29).
35).