HP Pavilion 13 Maintenance And Service Manual page 40

10. Release the zero insertion force (ZIF) connector (1) to which the power button board cable is
attached, and then disconnect the power button board cable from the system board.
11. Release the ZIF connector (2) to which the keyboard cable is attached, and then disconnect the
keyboard cable from the system board.
12. Release the ZIF connector (3) to which the TouchPad assembly cable is attached, and then
disconnect the TouchPad assembly cable from the system board.
13. Remove the keyboard/top cover.
Reverse this procedure to install the keyboard/top cover.
32 Chapter 5 Removal and replacement procedures