Chapter 6. Remote Network Operation; Remote Interface Overview - IBM PROJECTOR C400 User Manual

Ibm projector user guide c400

Hide thumbs Also See for PROJECTOR C400:

Table of Contents

Chapter 6. Remote network operation

When connected to a Local Area Network (LAN) by means of the RJ-45 connector,

the projector can be controlled remotely through a Web browser by any of the

clients (PCs connected to the LAN) on the LAN. The projector can also be accessed

outside the LAN, provided a firewall is configured accordingly.

Note: The factory default is set to DHCP for the projector. You can see the current

The following shows the remote interface main screens.

IP address in the Information menu.

6-1

Table of Contents