Projector Features - IBM PROJECTOR C400 User Manual

If any of the items listed above are missing or damaged, contact your place of
purchase.
Note: Be sure to retain your proof of purchase; it will be required to receive
For information on optional accessories for your projector, go to the
http://www.ibm.com.
Important:
v Avoid using the projector in dusty environments
v Leave the power cable plugged in (for 2-5 minutes) until the projector returns to
v Be sure to attach the lens cap and place the projector into the soft case with the

Projector features

The figures below show the different views and features of the projector.
Figure 1-2. Front view of projector
11 Computer cable (DVI-I)
12 Video cable (RCA- RCA)
warranty service.
room temperature before placing the projector inside the soft case. Placing the
projector into the case too soon after switching off the power could cause the
projector to overheat and will shorten lamp life.
lens facing upward to avoid damaging the lens.
1 Zoom
2 On-Screen Display (OSD) buttons and Light-emitting diodes (LEDs)
3 Remote control receiver (IR)
4 Speaker
5 Elevator foot adjuster button
6 Elevator foot
7 Focus ring
Chapter 1. Product description
1-3