Table of Contents
Advertisement
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem
persist, there may be a malfunction.
In that case, disconnect the power immediately and contact your place of purchase.
Symptom
Cause
Subwoofer
• AC power plug is not securely
(DSW-1312):
connected.
Indicator does not
light and no sound
is produced when
power is turned on.
Subwoofer
• Cables are not securely
(DSW-1312):
connected.
Indicator lights
• Volume adjustment control is
but no sound is
turned all the way down.
produced.
• Protective circuit has been
activated due to excess input or
rise in temperature.
Subwoofer
• Volume level is too high.
(DSW-1312):
Sound is distorted.
• Sound is being distorted on
connected amplifier.
Subwoofer
• Volume of subwoofer or
(DSW-1312):
amplifier set too high.
Oscillation (loud
continuous sound).
Volume does not
• The subwoofer is connected
adjust in sync
to a terminal other than the
with volume of
amplifier's SUBWOOFER
amplifier.
PREOUT connector (to
terminals with a set output
level).
Countermeasure
Page
• Check the connection of the AC
4
power plug.
• Connect securely.
4
• Turn the control and set it to the
3, 4
desired position.
• Set the power switch to the
–
"OFF" position, wait at least
1 minute, then set the power
switch back to the "ON"
position.
If the problem persists, unplug
the power cord from the AC
power outlet and contact your
place of purchase.
• Turn the volume adjustment
3, 4
control counterclockwise to
lower the volume.
• Do not amplify the bass sound
–
on the amplifier. (Lower the
amplifier bass adjustment
control or volume.)
• Lower the volume of the
3, 4
subwoofer or amplifier.
• Connect the subwoofer to
–
the amplifier's SUBWOOFER
PREOUT connector.
Specifications
n Front speaker and surround speaker (SC-F1312)
Type:
Full-range 1-speaker
Closed box
Drive units:
8 cm cone full range x 1
Input impedance:
6 Ω
Max. input:
60 W (IEC)
120 W (PEAK)
Frequency range:
150 Hz – 20 kHz
Dimensions:
105 (W) x 200 (H) x 150 (D) mm (4-9/64" x 7-7/8" x 5-29/32")
Weight:
0.8 kg (1 lbs 12 oz)
n Center speaker (SC-C1312)
Type:
Full-range 1-speaker
Closed box
Drive units:
8 cm cone full range x 1
Input impedance:
6 Ω
Max. input:
60 W (IEC)
120 W (PEAK)
Frequency range:
150 Hz – 20 kHz
Dimensions:
200 (W) x 105 (H) x 150 (D) mm (7-7/8" x 4-9/64" x 5-29/32")
Weight:
0.8 kg (1 lbs 12 oz)
n Subwoofer (DSW-1312)
Type:
Reflex box
Built-in amplifier
Drive unit:
20 cm cone woofer x 1
Frequency range:
35 Hz – 150 Hz
Dynamic power:
100 W
Input impedance:
22 kΩ
Power supply:
AC 230 V, 50/60 Hz
Power consumption:
65 W
MAX. 0.5 W (Standby)
Dimensions:
250 (W) x 387 (H) x 420 (D) mm (9-27/32" x 15-15/64" x 16-17/32")
Weight:
11 kg (24 lbs 4 oz)
* For improvement purpose, specifications and design are subject to change without notice.
ENGLISH
5
Hide quick links:
Advertisement
Table of Contents
