Subwoofer Connections (Dsw-1312); Auto Standby Function; Connecting The Power Cord; Playback - Denon SYS-5.1 Owner's Manual

ENGLISH

Subwoofer connections (DSW-1312)

Connect this input to the pre-out connector for the subwoofer on the
amplifier's SUBWOOFER PRE OUT using the included audio cable.
Included audio cable
(RCA pin-plug cord)
NOTE
• Do not plug the power cord into an AC power outlet until all
connections have been completed.
• Note that clamping pin-plug cords and power cords together or
running pin-plug cords near the power transformer could result in
humming or noise.

Auto standby function

This subwoofer is automatically set to the standby mode if no signal
is input for 5 to 15 minutes, to save electricity.
The power turns on immediately when a signal is input.
4

Connecting the power cord

Wait until all connections have been completed before connecting
the power cord.
Amplifier
SUBWOOFER
PRE OUT
NOTE
Insert the AC plug securely. Incomplete connections could cause
noise.

Playback

To household
power outlet
(AC 230 V, 50/60 Hz)
Power cord

Using the subwoofer

1
Set
2
Adjust the volume using
POWER
to the "ON" position.
LEVEL
.
LEVEL
POWER