Status Overview - Fujitsu PRIMERGY B900 Reference Manual

Status Overview

Status Overview
The status overview in the main frame uses icons (
overview of the status of all configured components. You obtain detailed information
on the status of the various subcomponents by expanding the main component
concerned.
Further information on the icons is available in the following Icon Overview.
Status Icons
OK
Information
Warning/PDA
Error
Critical
CSS LED
CSS LED
Error LED
Error LED
CSS/Error
LED
CSS Warning
CSS Critical
Location LED Indicates that the MMB's ID LED is on.
Location LED Indicates that the MMB's ID LED is off.
6
Indicates that all components are operating without error.
Indicates that a device is not installed.
Indicates that an error of the type Warning or PDA Error has
occurred in one or more components.
Indicates that an error of the type Critical Error has occurred
in one or more components.
An error of the type Warning or PDA Error has occurred in
the system.
When the yellow icon is in the blinking state, it is not a
warning or PDA Error but indicates an error of the type
Critical Error.
An error of the type Warning or PDA Error has occurred in
the system.
When the red icon is in the blinking state, it is not a warning
or PDA Error but indicates an error of the type Critical
Error.
The gray icon indicates that all system components are
operating without error.
One or more components which should be replaced by the
customer are in a warning state.
One or more components which should be replaced by the
customer are in a critical state.
This icon is optional and is displayed only if a USB stick is
connected to the Master MMB.
) to provide an up-to-date