Table of Contents
Advertisement
Settings
Event Log function.
Management Blade Event Log: Enables/disables the management blade's Wrap
•
Around Event Log function.
Mail Configuration
Email Alerting
•
Enable Alarm Mail: Enables/disables the mail alert function.
o
Mail Format: Sets the Mail Format (ITS-Format or REMCS).
o
Global Email Paging Configuration
•
SMTP Retry (0 - 7): Sets the retry count (0 - 7) if the SMTP server
o
response failed.
SMTP Retry Delay (0 - 255): Sets the retry interval in seconds if the
o
SMTP server response failed.
Primary/Secondary SMTP Server Configuration
•
SMTP Server: Sets the domain name or IP address of the SMTP server.
o
SMTP Port (1 - 65535): Sets the port number of the SMTP server.
o
Auth Type: Selects the authentication type. Auth-Login, Auth-Plain and
o
Auth-Cram-md5 are supported.
AUTH User Name: Enter the authentication user name.
o
AUTH Password: Enter the authentication password.
o
Email-Format-dependent Configuration: The user can configure the sender
•
email address, administrator name and phone number here. Up to 5 user email
addresses that can be modified are supported.
Date/Time
Controller Time
Sets the date and time for the MMB. The format is (MM/DD/YYYY) and
•
(HH:MM:SS).
Time Zone
Sets the time zone for this system.
•
Network Time Protocol
Enable NTP: Enables/disables the NTP function.
•
NTP Server 1: Enter the NTP server IP address.
•
NTP Server 2: Enter an alternative NTP server IP address (if Redundancy is set,
•
the MMB takes this second address if the first one cannot be reached).
Sync Mode: There are two sync modes available:
•
Sync Afterward: Only when the management blade time is ahead of the NTP
server time will the management blade synchronize the time from the NTP
server.
Sync Always: The management blade always synchronizes the time from the
NTP server.
Last Sync Date/Time: Displays the latest date/time that the management blade
•
34
Advertisement
Table of Contents
