Fujitsu PRIMERGY B900 Reference Manual page 14

Components
36/8+2").
Downlink Port Group Speed Settings (for 10 GbE Connection Blade-x only):
•
Here you can set the transfer speed separately for port groups comprising two
server bays each or uniformly for all server bays.
Reset Interface Settings to Default: Resets the interface settings listed below to
•
their default values:
User Assigned Name: [<rack name>-]<enclosure name><last 6 digits of
o
enclosure serial no.>-CB<bay no.>
As default the <rack name> is empty.
DHCP OOB: enabled
o
Internal Stacking Link: disabled
o
Port-Speed Settings: All ports will be set to 10 Gb/s
o
Firmware Mode Settings: Some connection blades are able to boot different
•
firmware modes. Changing the boot mode forces a reboot of the connection
blade. Please refer to the corresponding connection blade manual for the
detailed information about boot modes.
Account Settings
•
Privileged Mode Password: Enter a password for the privileged mode of
o
the connection blade.
Login User Name: Enter the login user name for the connection blade's
o
web home page.
Login Password: Enter the login password for connection blade's web
o
home page.
Note: If the preconfigured user and password settings are changed via the
connection blade's command line interface or WebUI, these login settings have
to be made here, too. Otherwise the MMB is no longer able to access the
connection blade.
Port Group Speed Settings (for 10 GbE Connection Blade-x only): Here you can
•
set the transfer speed separately for port groups comprising three server bays
each or uniformly for all server bays.
Backup/Restoration
Backup Configuration
•
Backup Media: Here you select the medium on which the interface data
o
between the MMB and the connection blade is to be backed up
(Memory, USB or Local File).
Memory/USB Backup File: You can change the name of the file
o
containing the backed-up data here by clicking the "New Name" button.
A new file name consisting of an identification tag and the current date
is then generated.
Memory/USB Backup Status: After you have clicked the "Backup"
o
button, the status is displayed here. After the backup has been
completed, you can click the "Refresh Status" button to return to the
default status "Not Started".
Restore Configuration
•
Backup Media: Here you select the medium from which the interface
o
data between the MMB and the connection blade is to be restored
14