4-Button Transmitter Configuration - Avital 3300L Installation Manual

Car security system directed
Hide thumbs Also See for 3300L:
Table of Contents

Advertisement

4.
Transmit. While HOLDING the Valet/Program switch, press the transmitter button that you
wish to assign to that channel. The unit will chirp indicating successful programming.
5.
Release. Once the code is learned, the Valet/Program switch can be released.
You can advance from one channel to another by releasing the Valet/Program switch and tapping it to advance
channels and then HOLDING it. For example, if you want to program Channel Three after programming Channel
One, release the Valet/Program switch. Press it twice and release it to advance to Channel Three. Then press it once
more and HOLD it. The siren will chirp three times to confirm it is ready to receive the code from the transmitter.
One long chirp will indicate that Code Learning has been exited if any of the following occurs:
■ Ignition is turned off.
■ The doors are closed.
■ Valet/Program switch is pressed too many times.
■ More than 15 seconds elapses between steps.

4-button transmitter configuration

The standard 4-button and LCD 2-way transmitters can be programmed in one step by using the Auto-learn func-
tion. When programmed for Standard Configuration, the 4-button transmitter buttons are assigned to the
following functions:
Button .....................................................operates...............................................Arm
Button ....................................................operates...............................................Disarm
Button ..................................................operates...............................................Channel Two
Button .....................................................operates...............................................Panic
and
Buttons.....................................operate ................................................Channel Three
and
Buttons .................................operate ................................................Channel Four
2008 Directed Electronics, Vista CA - all rights reserved
27

Advertisement

Table of Contents
loading

Table of Contents