JVC HX-Z1 Service Manual page 8

HX-Z1
2.1.4 Removing the antenna board
(See Fig.10, 11)
• Prior to performing the following procedure, remove the metal
cover.
REFERENCE:
There is no need to remove the CD changer mechanism as-
sembly.
(1) Disconnect the card wire from connector CN1 on the an-
tenna board on the right side of the body.
(2) Remove the band attaching the antenna board.
(3) Remove the two screws F on the rear panel on the back
of the body.
8
Fig.10
Fig.11