JVC HX-Z1 Service Manual page 10

Compact component system

Hide thumbs Also See for HX-Z1:

Table of Contents

Enlarged version

HX-Z1

2.1.6 Removing the fan assembly

(See Fig.18, 19)

• Prior to performing the following procedure, remove the metal

cover and the CD changer mechanism assembly and the rear

panel.

(1) Remove two screws G on the rear panel.

(2) Rotate fan assembly in clockwise direction to release fan

assembly from rear panel (joint d).

2.1.7 Removing the main board

(See Fig.20)

• Prior to performing the following procedure, remove the metal

cover, the CD changer mechanism assembly, the antenna

board and the rear panel.

(1) Disconnect the card wire from connector CN44,CN922

and CN870 on the main board.

(2) Remove the screw D attaching the board.

(3) Disconnect connector CN217 and CN311 on the main

board outward and release from the base chassis (joint e)

upward.

Fig.18

Fig.19

Fig.20

Table of Contents