JVC HX-Z1 Service Manual page 18

Compact component system

Hide thumbs Also See for HX-Z1:

Table of Contents

Enlarged version

HX-Z1

3.1.3 Removing the CD loading mechanism assembly

(See Fig.10)

(1) While turning the cams R1 and R2 assembly in the arrow

direction h ,align the shaft i of the CD loading mechanism

assembly to the position shown in Fig.10.

(2) Remove the four screws F retaining the CD loading mech-

anism assembly.

3.1.4 Removing the CD traverse mechanism

(See Fig.11 and 12)

(1) For dismounting only the CD traverse mechanism without

removing the CD loading mechanism assembly, align the

shaft j of the CD loading mechanism assembly to the po-

sition shown Fig.11 while turning the cam R1 and R2 as-

sembly in the arrow direction k .

(2) By raising the CD loading mechanism assembly in the ar-

row direction l , remove the assembly from the lifter unit

(See Fig.12).

Fig.10

Fig.11

Fig.12

Table of Contents