HX-Z1
3.1.7 Removing the cam unit
(See Fig.15 ~17 )
(1) Remove the CD loading mechanism assembly.
(2) While turning the cam gear q , align the Paul r position of
the drive unit to the notch position(Fig.16) on the cam gear
q .
(3) Pull out the drive unit and cylinder gear(See Fig.17).
(4) While turning the cam gear q , align the Paul s position of
the select lever to the notch position(Fig.18) on the cam
gear q .
(5) Remove the four screws H retaining the cam unit(cam
gear q and cams R1/R2 assembly)(See Fig.18).
20
Fig.15
Fig.16
Fig.17