JVC HX-Z1 Service Manual page 25

3.2.5 Removing the flywheel
(1) Remove the head amplifier & mechanism control P.C.
board.
(2) Remove the main motor assembly.
(3) After turning over the cassette mechanism, remove the
two slit washers and fixing the capstan shafts R and L, and
pull out the flywheel (R) and (L) respectively from behind
the cassette mechanism.
3.2.6 Removing the reel pulse P.C. board and solenoid
(See Fig. 10)
(1) Remove the five pawls a to e reattaining the reel pulse
board.
(2) From the surface of the reel pulse board parts, remove the
two pawls f and g retaining the solenoid.
(See Fig. 8, 9)
Fig.10
HX-Z1
Fig.8
Fig.9
25