Programming Lcd Remote - Autopage C3-RS-730 LCD Operation Manual

SVMASTER -
Table 5: Do-Re-Mi sounds to confirm
F
Button
Press and hold the
Button for 6 second until
Do-Re-Mi sounded
D. PROGRAMMING LCD REMOTE:
Selecting and Adjusting Menu options:
•
? Press and hold
•
? The text
•
? Press
•
? Press
•
? Press
•
the selection.
•
? Press
•
through the selection.
•
? Press
•
EXIT: Press
Order Menu Option
1 Parking Menu
Illumination Menu
2
SVMASTER -
LCD display
F
DEFLT
flashing
F
button for 1 second until 2 beeps sound, then release the
will flash on the LCD screen, press
button to move up in the menu or
button to select the option you would like to adjust.
button to increase the value, to activate or deactivate a function or to toggle through
button to decrease the value, to activate or deactivate a function or to toggle
button to move to the next sub-option or go back to the main menu.
button to exit the menu mode.
LCD display
PARK METER
0:30
- Parking hours
0 is flashing
0:30
- Parking
30 is flashing
minutes
- Toggle Parking
countdown
3 SEC.
- Toggle
5 SEC
Illumination Mode
OFF
button to enter the menu.
button to move down in the menu.
Functions
Default is
- Adjusts parking hour
,
(value from 0 to 2).
, - Adjusts parking minute
(value from 0 to 59).
- Enables parking countdown.
+ or
There is a beep 5 min. before the Parking
countdown reaches 0.
- Disables parking countdown.
Default is
or
, Basic operation with backlight
. or
Illumination 3 SEC. or 5 SEC. ;
OFF – basic operation without backlight
Illumination.
-
14
http://www.msvmaster.lv
-
Button
Press & hold button for 2 seconds
to back to default setting and 1 chip for
confirm
F
button.
http://www.msvmaster.lv