Advanced Wireless - D-Link GO-RTW-N300 User Manual

Section 2 - Setting Up With a Web Browser - Router Mode
Enable Wireless:
Enable wireless on your network.
Fragment
The fragmentation threshold, which is specified in bytes,
Threshold (256-
determines whether packets will be fragmented. Packets
2346):
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
This value should remain at its default setting of 2346.
RTS Threshold (1-
If inconsistent data flow is a problem, only a minor
2347):
modification should be made.
Use the dropdown menu to specify whether the router
Preamble Type:
should use the Short Preamble or Long Preamble type.
The preamble type defines the length of the CRC (Cyclic
Redundancy Check) block for communication between the
router and roaming wireless adapters.
Set the transmit power of the antennas as a percentage.
Radio Power:
Enable this feature to force the use of the 40 MHz band
HT20/40
even in heavily congested areas. Enabling this feature may
Coexistence:
reduce transmission speeds when there are a number
of other wireless N devices operating within the same
vicinity. When disabled, the GO-RTW-N300 will drop back
to the slower 20 MHz when heavy congestion is detected
on the 40 MHz band.
D-Link GO-RTW-N300 User Manual

Advanced Wireless

31