Wireless; Wireless Basics - D-Link GO-RTW-N300 User Manual

Section 2 - Setting Up With a Web Browser - Access Point Mode
This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network
parameters.
Enable SSID Enable SSID broadcast if you want the router to transmit its
Broadcast: SSID publicly so other wireless devices can discover it.
Enable Wireless
Enable wireless isolation to prevent connected wireless
Isolation:
devices from connecting to other wireless devices that are
also connected to the router.
Name (SSID):
Enter the SSID name you want to use for the wireless
network.
Mode:
Use the dropdown menu to specify the wireless mode.
Channel:
Use the dropdown menu to select the wireless channel.
Band Width:
Use the dropdown menu to select the channel bandwidth.
If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n
wireless modes, the available options are 20 MHz and 20/40
MHz. For the others, 20 MHz is the only option.
Security
Select a wireless security encryption option. You can also
Options:
choose to not use one by selecting None, but this is not
recommended.
D-Link GO-RTW-N300 User Manual

Wireless

Wireless Basics

54