Router Mode; Initial Setup Wizard - D-Link GO-RTW-N300 User Manual

Section 2 - Setting Up With a Web Browser - Router Mode

Router Mode

Initial Setup Wizard

If this is your first time setting up the GO-RTW-N300, open your
web browser. You will automatically be directed to the Wizard
Setup Screen.
This wizard is designed to guide you through a step-by-step
process to configure your new D-Link router and connect to the
Internet.
The network map at the top of the page shows your current
network connections. A green tick represents a successful
connection between two devices. The IP address of each device
will also be displayed.
Select your WAN network type, then enter your wireless SSID
and key.
DHCP: Select this if you use a cable modem, or if you are not
sure what connection type you use.
PPPoE: Select this if you use a DSL modem, or if you have to
enter a username and password for your Internet connection.
Static: Select this only if instructed to by your Internet service
provider.
Note: It is recommended to write down the SSID and security key,
followed by the login password.
D-Link GO-RTW-N300 User Manual 13