Hardware Overview; Front/Side - D-Link GO-RTW-N300 User Manual

Section 1 - Product Overview
1
Power LED
2
Internet LED
3
Mode Selector Switch
4
WPS Button
5 Reset Button
LED Indicator
Power
Internet
D-Link GO-RTW-N300 User Manual

Hardware Overview

Front/Side

1
2
This indicates the current power status of the GO-RTW-N300, as detailed in the table below.
This indicates the current Internet link status of the GO-RTW-N300, as detailed in the table below.
Slide this switch to select between Router Mode and Access Point Mode
Press this to activate Wi-Fi Protected Setup(WPS) to connect other wireless devices automatically.
Pressing the Reset button for 6 seconds restores the router to its original factory default settings.
Color Status
Solid
Blue Blinking
Light off
Solid
Blue
Light off
3
4
5
Description
The device is powered on and operating properly
The device is connecting to a device through WPS
The device is powered off
The device is successfully connected to the Internet
The Internet connection is not established
5