D-Link GO-RTW-N300 User Manual page 22

Section 2 - Setting Up With a Web Browser - Router Mode
If you selected Static IP, enter your IP address, subnet mask, default
gateway, primary DNS, and secondary DNS, and click Next to
continue.
You can also configure the wireless network and security settings.
If you prefer not to, click Disable the wireless radio.
Click Next to continue.
SSID: Enter the SSID name.
Channel:
Use the dropdown menu to select the wireless channel.
Mode:
Use the dropdown menu to specify the wireless mode.
Channel Width:
Use the dropdown menu to select the channel bandwidth.
If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n
wireless modes, the available options are 20 MHz and
20/40MHz. For the others, 20MHz is the only option.
Disable
You can also choose to not use wireless security by
Security:
selecting this, but this is not recommended.
WPA/WPA2-
If you select this, enter a passkey in the box that appears.
Personal:
D-Link GO-RTW-N300 User Manual 18