Router Mode; Access Point Mode - D-Link GO-RTW-N300 User Manual

Section 2 - Setting Up With a Web Browser
4. Open a web browser. In Router Mode, first time users will
automatically be directed to the setup wizard. For more details
about this wizard, refer to page 13.
If the setup wizard does not appear, or the GO-RTW-N300 is in
Access Point Mode, enter the IP address of the device in Router
Mode (default http://192.168.0.1) or Access Point Mode
(default http://192.168.0.50) in the address bar.
5. If you have set up the GO-RTW-N300 before, you will see a login
screen. Type "admin" as your user name, and enter the password for
the GO-RTW-N300. By default, the password should be left blank.
The configuration interface will open, and you can configure
the different settings of the GO-RTW-N300.
For detailed information on configuring your device, refer to the
following sections of the manual:
• "Router Mode" on page 13.
• "Access Point Mode" on page 52.
D-Link GO-RTW-N300 User Manual

Router Mode

Access Point Mode

12