D-Link GO-RTW-N300 User Manual page 29

Section 2 - Setting Up With a Web Browser - Router Mode
If you choose Static IP, please configure the following fields;
WAN Access Select Static.IP from the drop-down menu.
Type:
IP Address:
Enter the static IP address which was provided to you by
your Internet Service Provider (ISP).
Subnet Mask: Enter the subnet provided by your ISP.
Default Enter the default gateway provided by your ISP.
Gateway:
MTU Size:
Enter the Maximum Transmission Unit size. The default value
is 1500.
DNS Server 1: Enter the primary DNS server address provided by your ISP.
DNS Server 2: Enter the secondary DNS server address provided by your ISP.
MAC Clone: Select the MAC address to be used for the connection.
Select Default MAC to use the router's MAC address. Select
MAC. from. PC to copy your PC's MAC address, or select
MAC.Manual.to manually enter a MAC address in the field
provided.
Click Apply.Changes to save the current configuration, or
click .Reset to discard.
D-Link GO-RTW-N300 User Manual 25