Type 8316 - IBM ThinkCentre 2296 Hardware Maintenance Manual

4. Lift the power supply out.
To replace the power supply, do the following:
1. Install the new power supply and insert the four screws that hold the power
2. Reconnect all power supply cables to the system board and the drives. See
3. Go to "Replacing the cover and connecting the cables" on page 64.

Type 8316

Before performing any removals or replacements, turn off the computer and
peripheral devices and disconnect all external cables and power cords.
To remove the power supply, do the following:
1. Turn off the computer and peripheral devices and disconnect all external cables
2. Disconnect all power supply cables from the system board and the drives. See
3. Remove the two screws that hold the power supply in place.
60
Hardware Maintenance Manual
supply in place.
"Identifying parts on the system board (all machine types)" on page 40.
and power cords; then, remove the cover. See "Removing the cover" on page
32.
"Identifying parts on the system board (all machine types)" on page 40.