Types 8198 And 8199 - IBM ThinkCentre 2296 Hardware Maintenance Manual

4. Lift the power supply out.
To replace the power supply, do the following:
1. Install the new power supply and insert the four screws that hold the power
supply in place.
2. Reconnect all power supply cables to the system board and the drives. See
"Identifying parts on the system board (all machine types)" on page 40.
3. Go to "Replacing the cover and connecting the cables" on page 64.

Types 8198 and 8199

Before performing any removals or replacements, turn off the computer and
peripheral devices and disconnect all external cables and power cords.
To remove the power supply, do the following:
1. Turn off the computer and peripheral devices and disconnect all external cables
and power cords; then, remove the cover. See "Removing the cover" on page
32.
2. Disconnect all power supply cables from the system board and the drives. See
"Identifying parts on the system board (all machine types)" on page 40.
3. Remove the four screws that hold the power supply in place.
Chapter 6. Replacing FRUs
59