5. Secure the adapter with the screw as shown.
6. Go to "Replacing the cover and connecting the cables" on page 64.
Type 8191
This computer has three expansion slots for PCI adapters and one slot used for an
AGP adapter. You can install an adapter up to 340 mm (13.4 inches) long.
1. Remove the cover. See "Removing the cover" on page 32.
2. Remove the adapter being replaced.
3. Remove the new adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
5. Install the adapter-slot-cover latch.
6. Go to "Replacing the cover and connecting the cables" on page 64.
42
Hardware Maintenance Manual