CD510K
Test Antenna Connection
1
PWR
or
2
1. Press the Tuning
Ring up or down.
The radio should
tune to a nearby
station. If not,
check antenna
connection.
2. Turn the volume
knob to increase
volume until you
can hear the
radio playing.
Test Memory Wiring
1. With the radio playing,
1
hold button 1 for five
seconds. You just stored
the current station in
memory.
5 Sec
2. Turn the key off, then turn
2
the key on again.
3
PWR
or
4. Press button 1 again. It
4
should return to the station
that was playing before
(step 1). If not, make sure
the yellow wire is con-
nected properly.
®
3. Press the Tuning
Ring up or
down. The radio
will select a
different station.
9