Jensen car stereo for maximum enjoyment. Warranty Service If your Jensen stereo should ever require service, you will need to have the original dated receipt. If you ever need to return the unit for any reason, always include the receipt with the product.
Auxiliary Input Auxiliary Input Mode Press AUX to access Auxiliary Input Mode. (Only available if an auxiliary audio device is plugged into the Auxiliary Input Jack.) MP3/AUX INPUT HIGH POWER 45Wx4 CD3010X PROGRAM COMPACT MUTE DIGITAL AUDIO BAND RPT A-B...
Radio Operation Preset Stations Select a Band Six numbered preset buttons store and recall Press BAND button to change radio stations for each band. between three FM bands and two AM bands. Each band stores up to six BAND preset stations. Store a station: 1.
CD Player Operation Repeat • Random • Intro Scan • Elapse (CD Display) • Pause MP3/AUX INPUT HIGH POWER 45Wx4 CD3010X ( ST ) BASS PROGRAM COMPACT MUTE Pause DIGITAL AUDIO BAND Press to pause CD play. RPT A-B MEM/CLR...
Remote Control The Remote Control will allow you to control the basic functions of the CD3010X. Infrared Port The CD3010X is also compatible with the Jensen IR20 steering wheel remote control. (Purchased separately.) ® COMPACT TUN/TRK MUTE POWER DIGITAL AUDIO...
Welcome! For your Jensen stereo to work right, it must be installed correctly. This manual will show you how to install your new stereo like a pro. It’s a good idea to read all of these instructions before you begin the installation.
Page 7
Remove Old Radio Standard Bracket Mounted (GM, Dodge, Jeep) Remove dashboard Unscrew brackets. faceplate. Disconnect wiring harness and remove radio. Front Load Mount Some cars use a special removal tool to release the radio (Ford and Mercury). Insert removal tool(s). Disconnect wiring harness and remove radio.
Page 8
Install Half-sleeve Push tabs out to secure half-sleeve in the radio opening. Install support strap to make unit more stable. Install adapter if necessary. (optional) Install half-sleeve into adapter or dashboard. Set Frequency Spacing Switch There is a selectable frequency spacing switch on the bottom of the unit.
When replacing a fuse, make sure new fuse is correct type and amperage. Using an incorrect fuse could LR– RR– damage radio. The CD3010X uses one 10 amp fuse green/black violet/black located below wiring connector. green violet • 10 amp fast blow ATO...
4. Final Installation Secure Radio to bracket using nut. (if possible) Replace any items you removed from the dashboard. Connect wiring adapter PW R to existing wiring harness. VO L AU X CD 30 10 X SE L M P3 /A MU TE UX IN PU T...