Troubleshooting; Reset Button; Remove Radio From Dash; Detachable Flip-Over Panel - Jensen CD510K Installation Manual

®

Troubleshooting

Problem
Does not operate (display
does not light)
No speakers operate
(display lights normally)
Not all speakers operate
Blows fuses
ER-1 appears on display
ER-2 appears on display
ER-3 appears on display
ER-4 appears on display
ER-6 appears on display
ER-7 appears on display
ER-8 appears on display
Can't find cause of problem
Reset Button / Remove Radio
from Dash
Removal Keys

Reset Button

In case of abnormal operation, use a pencil tip
(or other non-metallic object) to press the
RESET button.

Remove Radio from Dash

To remove radio, insert removal keys into slots
between trim ring and radio and pull radio out.
12
Cause
No power to yellow wire
No power to red wire
Inline fuse blown
Speaker harness not connected
Incorrect splices or connections
Speaker wires shorting to chassis
ground or to each other
Power wire shorting to ground
Speaker wires shorting to ground
Incorrect fuse
High temperature
Disc loading error
Disc eject malfunction
Disc focus error
Mechanical malfunction
Data error
Disc reading error

Detachable Flip-Over Panel

Reset
Button
Corrective Action
Check connection
Check vehicle fuse
Replace fuse
Connect speaker harness
Check all splices and connections
Check splices, insulate all bare wires
Insulate wire
Insulate wire
Install fuse of correct rating
Wait until temperature returns to normal
Press Reset button
Press Reset button
Press Reset button
Press Reset button
Press Reset button
Try a different CD
Call Jensen Technical Assistance
(1-800-323-0221)
1. Press REL button to open flip-over panel.
2. Gently pull up on faceplate to remove.
Store faceplate panel in carrying case.
1
2
CD510K