Test Speaker Connections - Jensen CD510K Installation Manual

®

Test Speaker Connections

These tests make sure the speakers are connected right. If speakers don't play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.
Balance
1
1. Press SEL four times.
2. Turn the volume knob
2
Only the left speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
3. Turn the volume knob
3
Only the right speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
10
to the left until the
display shows L 12.
to the right until the
display shows R 12.
Fader
1
4. Press SEL five times.
5. Turn the volume knob
to the left until the
display shows R 12.
2
Only the rear speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
6. Turn the volume knob
3
to the right until the
display shows F 12.
Only the front speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
CD510K