Test Speaker Connections - Jensen DC 9520 A Installation Manual

KDC 9520

Test Speaker Connections

These tests make sure the speakers are connected right. If speakers don't play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.
Balance
1 1
2
VOL
VOL
Only the left speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
VOL
3
VOL
Only the right speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
KDC9520 _EIN.p65
1. Press SEL four times.
2. Hold on the
VOL
control button until
the display shows
L 12.
3. Hold on the
VOL
control button until
the display shows
R 12.
9
Fader
4. Press SEL five times.
4
5
5. Hold
control button until the
VOL
display shows R 12.
VOL
Only the front speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
6. Hold
VOL
6
control button until the
display shows F 12.
VOL
Only the rear speakers should be playing.
If not, check the wiring. Make sure you con-
nected the wires just like the chart on page 6.
3/14/00, 1:28 PM
®
on the
VOL
on the
VOL
9