Disarm; Remote Start - Viper 5906V Owner's Manual

Disarm

Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps
and lights flash twice. The
firm. If Valet mode* is On the doors unlock and the
animation and tone play.
More than 2 siren chirps and remote beeps indicates a trigger has
occurred. The Disarm animation is then replaced by the Alarm Trigger
report.**

Remote Start

Press and release
Activates (or if On, deactivates) the remote starter. The engine and lights
turn On and the
or the engine and lights turn Off and the
animation and Off tones play to confirm. The Remote Start status icons
in the Status screen are updated accordingly. If Remote Start fails to
activate, a fault screen and tone plays to identify the reason.***
* See "Remote and System Operations" on page 45 for details.
** See "Alarm Features" on page 35 for details.
*** See "Remote Start Not Available" on page 44.
For Manual transmission vehicles see the "Manual Transmission Start (MTS
mode)" on page 42 for more details.
© 2013 Directed. All rights reserved.
DISARM
REMOTE START ACTIVATED
animation and beeps play to con-
animation and On tones play,
REMOTE START DEACTIVATED
UNLOCK (IN VALET)
13