Programming; Remote Learning - Viper 5906V Owner's Manual

System Expansion Options
* See

Programming

To enter; hold the
beep and turns the LED on, the programming main menu has been
accessed.
To exit; press and release the
1 short and 1 long beep is emitted for each step back, the LED turns
off when programming is exited.
Sensor Adjust
To avoid unintended alarm triggers, it is recommenced that an
authorized Directed dealer perform all sensor adjustments.
Remote Features menu
Press and release the
cate the remote features menu is accessed and can be set. Press
buttons indicated below, 1beep and flash turns the feature on, 2
beeps and flashes turns the feature off.
• Autolock feature: Press
• Remote Beeps: Press
• Car 2 feature: Press

Remote Learning

Press the
is ready to program to the system.
Per the instruction in the Remote Pair section of this guide, follow-
ing step 4 of Placing the system into the remote pair mode. Press
and hold the
the remote has been learned.
© 2013 Directed. All rights reserved.
button for 8 seconds, the remote emits one long
button, 2 LED flashes and beeps indi-
button,3 LED flashes and beeps indicates the remote
button, the siren emits one long chirp to confirm
for more details .
button to go back and repeat to exit.
to turn on/off.
to turn on/off.
to turn on/off.
51